VACUUBRAND PC 3012 VARIO plastic housing - Manual (Page 42)

page 42 of 129
Catchpots:
The catchpot at the inlet protects against droplets and par-
ticles from entering the pump.
+
Enhances lifetimes of diaphragms and valves.
+
Improves vacuum performance in applications with
condensable vapors.
PC 300x VARIO:
Both catchpots are coated with a protective
layer to protect against shattering in case of
breakage or implosion.
➨
Assemble the catchpots at the inlet and at
the outlet using joint clips.
PC 301x VARIO:
➨
Assemble the inlet catchpot (18) with cen-
tring ring and clamping ring at the inlet of
the pump.
➨
Assemble the collecting flask (20) at the
exhaust waste vapor condenser using the
joint clip.
➨
In addition to connecting the pump inlet to
the application, install a vacuum connection
(hose) between the pressure transducer
(measurement connection at the rear of the
CVC 3000) and the vacuum system.
Exhaust waste vapor condenser:
➨
Assemble the hose nozzles for coolant inlet
(15) and coolant outlet (16) tubing and for
the gas outlet (8) at the exhaust waste va-
por condenser.
The exhaust waste vapor condenser en-
ables an efficient condensation of the pumped
vapors at the outlet.
+
No backflow of condensates.
+
Controlled recovery of condensates.
+
Close to 100% solvent recovery.
+
The isolation cover protects against glass
catchpot at
outlet (14)
catchpot
at inlet (14)
(18)
(19)
(15)
(16)
PC 300x VARIO
outlet (gas!) (8)
(15)
(16)
outlet (gas!) (8)
PC 301x VARIO