Wilson Audio WATCH Center Channel Series 1 - Manual (Page 107)

107
S e c t i o n 9 - G e o m e t r i c A l i g n m e n t T a b l e s
The tables included in this section are intended to help determine the prop-
er placement of the tweeter based on measured listening position and measured ear
height of the listener.
Included in the crate with your Center channel was a hardware kit contain-
ing spikes, nuts, diodes, and spacers (see Figure22 below) to be used after the final
tuning and voicing of the Center channel. Except for the combinations listed
below, all ear height and listening combinations should reference Table A - No
Spacers (Use only the spike, nut, and diode) for the correct tweeter alignment
location for floor placement of the WATCH Center Channel.
The following measurements should reference Table B - One Spacer (use
the spike, nut, diode, and one spacer) for the correct tweeter alignment location
for floor placement of the WATCH Center:
Ear Height Listening Distance
40 “ 60” to 64”
44” 68” to 72”
48” 76” to 80”
52” 84” to 88”
S
E C T I O N
9 - G
E O M E T R I C
A
L I G N M E N T
T
A B L E S