Wilson Audio WATCH Center Channel Series 1 - Manual (Page 48)

48
S e t u p P r o c e d u r e
1. Gently slide the WATCH Center Channel out of the crate. Remove the
plastic outer bag by tilting the Center channel over on one side and open-
ing the bag at the base of the Center channel. Remove the bag.
Note: Do not cut the bag off of the Center channel. You may mark the cabinet
or damage a driving element. Additionally, you will need this bag, if you need
to repackage the Center channel. Save your shipping crates and all packing
materials. They are specifically designed to prevent harm from coming to your
Center channel.
2. Move the Center channel into the desired location.
Note: Be careful not to touch the driving elements when you are moving your
WATCH Center channel!
C e n t e r C h a n n e l S p i k e A s s e m b l y
The WATCH Center channel comes with two sets of spikes with a diode and
spacers, and two sets of spikes with only the spike and nut. This will allow the
speaker to be tilted to a variety of angles. These spikes provide acoustical isolation
as well as optimal height placement for your speakers. There are three ways of
assembling the spikes (without spacers, with one spacer, or with two spacers), and
your choice will depend on the location of the Center channel and personal tastes.
The spacers are provided to allow for the rotation of the WATCH Center towards
the listener. If the speaker is floor mounted, it will be tilted upward so the drivers
WAT C H C
E N T E R
C
H A N N E L
O
W N E R
’
S
M
A N U A L