Wilson Audio WATCH Center Channel Series 1 User Manual
Page 96
96
WAT C H C
E N T E R
C
H A N N E L
O
W N E R
’
S
M
A N U A L
Driver out or not playing after connec-
tions have been verified:
Amplifier shuts off as soon as it is
turned on:
If the problem is solved:
If the problem persists:
If the problem is solved:
If there is a driver with no output, poten-
tially the resistor is damaged and needs
replacing. Contact a local Wilson dealer
for replacement parts and service.
Check to see if the speaker cables are
properly secured. Look for frayed ends,
loose connections, or a conductor con-
tacting the amplifier chassis.
Turn the amplifier off and disconnect it
from the AC wall outlet. Disconnect the
preamplifier leads to the amplifier. Now
turn on the amplifier.
There is likely something wrong with
your preamplifier or interconnect.
Contact your dealer.
Leave the preamp leads disconnected and
continue to the next step.
Turn the amplifier off and disconnect it
from the AC wall outlet. Disconnect the
speaker leads at the main input to the
speaker. Now turn on the amplifier.
Call your Wilson Audio dealer. There
may be a problem with the crossover or