Wilson Audio WATCH Center Channel Series 1 - Manual (Page 53)

53
S e c t i o n 4 . 2 - C e n t e r C h a n n e l o n F l o o r
The floor mounted Center channel must be rotated up toward the listening
position. This is done by using a taller spike in the front than in the back of the
speaker (see Figure 8). The default rotation is set by using a combination of a
spike, a lock nut, and an acoustical diode. If required, additional rotation can be
achieved by using the provided 1/2” spacers between the diode and the bottom of
the cabinet (see Figure 6, page 49). The amount of rotation depends on your lis-
tening position.
Set the rotation as follows:
D
I O D E
, S
P I K E
,
A N D
N
U T
S
P I K E A N D
N
U T
O
N LY
S
PA C E R S
(
U S E O N LY I F I N D I
-
C AT E D I N TA B L E
)
F
I G U R E
8 - I
N S TA L L I N G T H E
S
P I K E S
S
E C T I O N
4 - WAT C H C
E N T E R
C
H A N N E L
S
E T U P