Section 5.1 - left and right, Determining front to back di, Section 5.1 - left and right channels – Wilson Audio WATCH Center Channel Series 1 User Manual

Page 76: Determining front to back distance

Advertising
background image

76

• Set up of Left and Right Channels, with all other speakers discon-

nected.

• Add the Center Channel.

• Add the Surround Channels.

• Add the Subwoofer.

Adding one speaker at a time will allow you to easily evaluate the integration

with the system and make the necessary adjustments to fine tune the setup.

S e c t i o n 5 . 1 - L e f t a n d R i g h t C h a n n e l s

D e t e r m i n i n g F r o n t t o B a c k D i s t a n c e

The proper setup of the left and right channels is crucial for optimum sys-

tem performance. If these speakers are not set up correctly, the entire system will

suffer from poor integration. Please follow these steps carefully:

Place the speaker in an appropriate location relative to your screen

and listening area. Make certain to remove the grilles and spikes.

Toe-in the speakers so that you can just barely see the inside edge

when seated in the primary listening position.

Using removable masking tape, graph off the floor so that you can

accurately move both speakers forward and backward in 1/2 inch

increments.

WAT C H C

E N T E R

C

H A N N E L

O

W N E R

S

M

A N U A L

Advertising