Ram Trucks 2015 ProMaster City - User Guide - Manual (Page 22)

WARNING!
• A loose head restraint thrown forward in a collision or hard stop could cause
serious injury or death to occupants of the vehicle. Always securely stow
removed head restraints in a location outside the occupant compartment.
• ALL the head restraints MUST be reinstalled in the vehicle to properly protect
the occupants. Follow the re-installation instructions above prior to operating
the vehicle or occupying a seat.
Rear Head Restraints
The outboard head restraints can be removed by pushing the release button and
adjustment button, located at the base of the head restraint and pull upward on the
whole assembly.
To reinstall the head restraint, put the head restraint posts into the holes and push
downward. Then adjust it to the appropriate height.
WARNING!
A loose head restraint thrown forward in a collision or hard stop could cause
serious injury or death to occupants of the vehicle. Always securely stow removed
head restraints in a location outside the occupant compartment.
The center head restraint is adjustable and removable. To raise the head restraint,
push and hold the adjustment button, located on the base of the head restraint and
pull upward on the head restraint. To lower the head restraint, push and hold the
adjustment button, and push downward on the head restraint till the desired height
is reached.
To remove the head restraint, push the release button and adjustment button while
pulling upward on the whole assembly and raise it as far as it can go. To reinstall the
headrest, put the headrest posts into the holes while pushing the release button and
adjustment button. Then adjust it to the appropriate height.
WARNING!
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the
occupants. Follow the re-installation instructions above prior to operating the
vehicle or occupying a seat.
G E T T I N G S T A R T E D
20