Glow plug light — if equipped, Park/headlight on indicator, Electronic speed control set indicator – Ram Trucks 2015 ProMaster City - User Guide User Manual

Page 73: Door ajar indicator, Electronic stability control off

Advertising
background image

– Glow Plug Light — If Equipped

This vehicle will inhibit engine cranking when the ambient temperature is less than
–22° F (–30° C) and the oil temperature sensor reading indicates an engine block
heater has not been used. The Glow Plug light will flash in cold weather for up to 10
seconds. An externally powered electric engine block heater is available as optional
equipment or from your authorized dealer.

The message "Plug In Engine Heater" will be displayed in the instrument cluster
when the ambient temperature is below 5°F (-15°C) at the time the engine is shut off
as a reminder to avoid possible crank delays at the next cold start.

– Park/Headlight ON Indicator

This indicator will illuminate when the park lights or headlights are turned on.

– Electronic Speed Control SET Indicator

This indicator will illuminate when the cruising speed has been set.

– Door Ajar Indicator

This indicator will illuminate when a door(s) is left ajar and not fully closed.

– Electronic Stability Control OFF

This light indicates the ESC system has been turned off by the driver.

– Electronic Stability Control (ESC) Activation/Malfunction

Indicator Light

The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will
come on for four seconds when the ignition switch is turned to the ON/RUN position.
If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the
engine running, a malfunction has been detected in the ESC system. If this light
remains on, see your authorized dealer as soon as possible to have the problem
diagnosed and corrected.

NOTE:
• The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator

Light” come on momentarily each time the ignition switch is turned to ON/RUN.

• Each time the ignition is turned to ON/RUN, the ESC system will be ON even if it

was turned off previously.

• ESC Activation/Malfunction Light can blink during a ESC or TC intervention.

W H A T T O D O I N E M E R G E N C I E S

71

Advertising