Shift lever override – Ram Trucks 2015 ProMaster City - User Guide User Manual
Page 92
SHIFT LEVER OVERRIDE
If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever:
1. Turn the engine OFF.
2. Firmly apply the parking brake.
3. Using a screwdriver or similar tool, carefully separate the shift lever boot from the
center console.
4. Push and maintain firm pressure on
the brake pedal.
5. Insert a small screwdriver or similar tool into the shift lever override access hole
(at the right front corner of the shift lever assembly) then push and hold the
override release lever down.
6. Move the shift lever to the NEUTRAL
position.
7. The vehicle may then be started in
NEUTRAL.
8. Reinstall the shift lever boot.
Shift Lever Boot Location
Shift Lever Override Access Hole
W H A T T O D O I N E M E R G E N C I E S
90