Ram Trucks 2015 ProMaster City - User Guide - Manual (Page 43)

Uconnect® 5.0
Clock Setting
1. To start the clock setting procedure, push the SETTINGS button on the right side
of the display, then “Clock & Date” button on the touchscreen, and then “Set Time
& Format” button on the touchscreen. Select the up or down arrows as appropriate.
2. Press the “Up or Down arrows” to adjust the hours or minutes, next select the AM
or PM button on the touchscreen. You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen.
3. Once the time is set press the “Done” or “back arrow” button on the touchscreen
to exit the time screen.
NOTE:
Once the time has been set on the radio, the time will also appear in the Electronic
Vehicle Information Center (EVIC).
Uconnect® 5.0
1 — Screen On/Off Button
2 — Settings Button
3 — Back Button
4 — Browse/Enter — Tune/Scroll
5 — More Button
6 — Uconnect ® Phone
7 — Compass/NAV — If Equipped
8 — Media Button
9 — Radio Button
10 — On/Off — Volume Knob
11 — Mute Button
E L E C T R O N I C S
41