Ram Trucks 2015 ProMaster City - User Guide - Manual (Page 31)

High Beam Operation
• Pull the multifunction lever toward you to switch the headlights to high beam.
• Pull the multifunction lever a second time to switch the headlights back to low beam.
A high beam symbol will illuminate in the cluster to indicate the high beams are on.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.
WIPER/WASHER LEVER
The Wiper/Washer Lever is located on the right side of the steering column.
Front Wipers
Intermittent, Low And High Operation
• Rotate the end of the lever upward to the first detent for intermittent wiper
operation, the second detent for low wiper operation and to the third detent for
high wiper operation.
Mist
• Push the lever upward from the off position. This operation will continue until the
lever is released. When the lever is released, the wipers will return to the off
position and automatically shut off.
Wiper Washer Lever
1 — Front Wiper/Washer
2 — Rear Wiper/Washer
3 — Intermittent, Low And High Speed
4 — Mist
O P E R A T I N G Y O U R V E H I C L E
29