Ram Trucks 2015 ProMaster City - User Guide - Manual (Page 44)

Equalizer, Balance And Fade
1. Push the SETTINGS button on the right side of the display.
2. Scroll down and press the “Audio” button on the touchscreen to open the Audio
menu.
3. The Audio Menu shows the following options for you to customize your audio
settings.
Equalizer
• Press the “Equalizer” button on the touchscreen to adjust the Bass, Mid and
Treble. Use the “+” or “-” buttons on the touchscreen to adjust the equalizer to
your desired settings.
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to adjust the sound from the
speakers. Use the “arrow” buttons on the touchscreen to adjust the sound level
from the front and rear or right and left side speakers. Press the Center “C” button
on the touchscreen to reset the balance and fade to the factory setting.
Speed Adjusted Volume
• Press the “Speed Adjusted Volume” button on the touchscreen to select between
OFF, 1, 2 or 3. This decreases the radio volume relative to a decrease in vehicle
speed.
Loudness
• Press the “Loudness” button on the touchscreen to select the Loudness feature.
When this feature is activated it improves sound quality at lower volumes.
Auto-On Radio
• Press the “Auto-On Radio” button on the touchscreen, select On, Off, or Recall
Last followed by pressing “Done” or the “back arrow” button on the touchscreen.
When this feature is activated, the radio automatically turns on when the vehicle
is in run or recalls whether it was on or off at last ignition off.
E L E C T R O N I C S
42