Start-up check sheet – Sears N8MPL050B12B1 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

START-UP CHECK SHEET

(Keep this page for future reference)

Recommended, but not required.

Dealer Name:____________________________________

Address:________________________________________

City, State(Province), Zip or Postal Code:_

Phone:

Owner Name:_

Address:____

City, State(Province), Zip or Postal Code:_

Model Number:.

Serial Number:

Type of Gas:

Natural: □ LP: □

Blower Motor H. P.:_______________________

Supply Voltage:__________________________

Limit Opens at...{°F)______ or(°C)_

Limit Closes at...(°F)______ or(°C)_

Which blower speed tap is used?

(Heating)___________ (Cooling)___

Temperature of Supply Air:

Temperature of Return Air:

(°F)_

(°F)_

_or(°C)_

_or(“C)_

Rise (Supply Temp.-Return Temp.): (°F)_______or(°C)_

Filter Type and Size:____________________________

Fan "Time ON" Setting:_

Fan "Time OFF" Setting:,

Dealer Comments:

Business Card Here

Manual Gas Shut-Off Upstream

of Furnace/Drip-Leg?

YES □

NO □

Drip-Leg Upstream of Gas Valve? YES □

NO □

Blower Speed Checked? YES □ NO □

All Electrical Connections Tight? YES □ NO □

Gas Valve turned ON? YES □ NO □

Measured Line Pressure When Firing Unit:________________

Calculated Firing Rate:(See Checks and Adjustments

Section).___________________________________________

Measured Manifold Pressure:___________________

Thermostat OK? YES □ NO □

Subbase Level? YES □

NO □

Anticipator Set? YES □

NO □ Set At?:_

Breaker On? YES □ NO □

Date of Installation:___________________________

Date of Start-Up:____________________________

441 01 2613 02

Advertising