Crestron electronic on wall speaker - Manual (Page 34)

Audio Distribution System Crestron Adagio™ AADS
Restore Defaults This screen allows you to restore the AADS to its factory default settings. The
AADS can restore all of the factory settings or just the audio settings.
• Open Installer Tools as described on page 23, select Restore Defaults, and
press the SELECT button.
Restore Defaults: Audio Settings Only
Restore Defaults
Audio Settings Only
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• Press the SELECT button to restore the audio settings to the factory
defaults.
• Press down on the selection control until All Settings is displayed and press
SELECT to restore all settings (audio, room names, source names, keypad
button assignments, and the tuner region) to the factory defaults. Ethernet
settings will not be reset.
• To cancel, press down on the selection control until Abort is displayed and
press SELECT.
System Information This screen allows you to view information about the AADS.
• Open Installer Tools as described on page 23, select System Information,
and press the SELECT button.
System Information
System Information
IP Address
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• Press the SELECT button to view the IP address of the AADS. Press
MENU to return to the System Information display.
• To see additional system information, press the selection control up or
down to display the parameter name and press SELECT to view details.
Configure Sources
The gain of each source can be customized from the AADS control panel.
Adjust the Gain of a Source To adjust a source’s gain:
• Select a source to adjust by pressing SOURCE and using the selection
control to display a source.
• Press and hold the SOURCE and MORE buttons at the same time to open
the Gain control.
30 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458