Crestron electronic on wall speaker - Manual (Page 40)

Audio Distribution System Crestron Adagio™ AADS
Operation
Prior to using this section, refer to the QuickStart Guide (Doc. 6459) that is included
with the AADS.
For instructions on using the APAD and the C2N-DBF12 with the AADS refer to the
latest version of the Out-Of-The-Box Functionality Guide (Doc. 6493).
Operating the AADS is broken down into four modes:
• Source Mode
• Room Mode
• Preset Mode
• Turn Off the System
Source Mode
Source mode is used to select and control sources that are connected to the AADS. A
selected source can also be routed to any room or rooms connected to the AADS or a
connected AAE.
Select a Source To select a source:
• Press SOURCE to put the AADS in Source mode. The current controlled
source is displayed on the LCD.
Source Mode
iPod
The Rolling Stones/
SOURCE
ROOM
PRESET
MENU
BKLT
SCHED
DISPLAY
MORE
• Press the selection control up or down until the desired source is displayed
on the LCD. Rooms that are connected to the displayed source are indicated
on the room buttons.
• Press the SELECT button to select and control the source.
When using the out-of-the-box functionality, the front panel of the AADS can
control the AM/FM or XM (AADS-XM only) tuners, an iPod connected to a
CEN-IDOC, and an AAS (when connected).
Controlling a Tuner
The built-in tuners can be controlled by the AADS front panel.
Find the Tuner Controls • Place the AADS in the Source mode (refer to “Select a Source” above).
• Press the selection control up or down to display the desired tuner source.
The frequency/channel and other information will be displayed.
36 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458