Crestron electronic on wall speaker - Manual (Page 9)

Crestron Adagio™ AADS Audio Distribution System
Specifications
Specifications for the AADS are listed in the following table.
AADS Specifications
SPECIFICATION DETAILS
Processor
CPU
Processing Speed
32-bit Freescale ColdFire
® Microprocessor
100 MIPS (Dhrystone 2.1 Benchmark)
Memory 8MB Flash, 32MB SDRAM, 256KB NVRAM
Operating System Real-time, preemptive, multitasking kernel,
multi-threaded, FAT32 file system with long
names; supports SIMPL Windows and
SIMPL+
®
Ethernet 10/100BaseT, static IP or DHCP/DNS, SSL,
autonegotiating, full duplex TCP/IP,
UDP/IP, SMTP, SNMP, built-in Web server
and e-mail client; supports Crestron
e-Control
® 2 XPanel and RoomView ®
applications
Audio Specifications
(Typical of six room outputs)
Controls
Amplifier Output
Power
Frequency
Response
Signal-to-Noise Ratio
(SNR)
Total Harmonic Distortion
(THD)
Stereo
Separation
AM Tuner
Frequency Range
Sensitivity
Selectivity
Up/Dn Freq Increments
Alternate Channel
Selectivity
Image
Rejection
IF Rejection
Audio Output level
@ 1 kHz
Volume, Balance, Bass, Treble, Loudness,
Mute, Mono, Input Compensation
45 Watts into 8 Ohms
60 Watts into 4 Ohms
20Hz to 20kHz ±0.75dB
98dB
0.05%
> 75dB
530-1710 kHz
3.5 µV (RF input level 10dB S+N/N)
10 kHz
10 kHz/9 kHz
55 dB
35 dB
60 dB
1 V
rms
(Continued on following page)
Operations Guide – DOC. 6458 Audio Distribution System: Adagio AADS • 5