Crestron electronic on wall speaker - Manual (Page 62)

Audio Distribution System Crestron Adagio™ AADS
• Confirm Ethernet connections between the AADS and PC. If connecting
through a hub, use CAT5 straight through cables with 8-pin RJ-45
connectors. Alternatively, Use a CAT5 crossover cable to connect the two
LAN ports directly, without using a hub.
• Use the Address Book in Crestron Toolbox to create an entry for the
AADS with the AADS’ TCP/IP communication parameters.
• Display the “System Info” window (click the
icon) and select the
AADS entry. Communications are confirmed when the device information
is displayed.
Programs and Firmware
• The Functions menu displays a list of actions that can be performed on the
AADS:
⇒
⇒
⇒
⇒
⇒
Upgrade firmware
IP Table
SIMPL Program
• Upload the SIMPL Windows file to the AADS using SIMPL Windows or
Crestron Toolbox.
• Upload the VisionTools Pro-e file to the AADS using VisionTools Pro-e or
the Crestron Toolbox.
• Upgrade AADS firmware via Crestron Toolbox.
Establish serial or TCP/IP communications with the AADS.
Select Functions | Firmware… to upgrade the AADS firmware.
For details on uploading and upgrading, refer to the SIMPL Windows help file,
VisionTools Pro-e help file, or the Crestron Toolbox help file.
58 • Audio Distribution System: Adagio AADS Operations Guide – DOC. 6458