Changing shooting functions, P. 134), Turning off the red-eye reduction function – Canon D10 User Manual

Page 134: Turning off the af assist beam

Advertising
background image

134

If you set the shooting mode to

G

(p. 68)

, you can change the settings in the

4 tab

(p. 48)

.

Turning off the Red-Eye Reduction Function

The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.

Select [Flash Settings], then press the

m

button.

Press the

op buttons to select [Red-Eye

Lamp], then press the

qr buttons to

select [Off].

Turning off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.

Select [AF-assist Beam], then press the
qr buttons to select [Off].

Before attempting to shoot using a function explained in this chapter in
modes other than

G mode, check if the function is available in those

modes

(pp. 150

153)

.

Changing Shooting Functions

Advertising