Canon D10 - Manual (Page 29)

29
You can view your images on the screen.
Select the playback mode.
● Press the 1 button.
The last image you took will appear.
Select an image.
● Pressing the q button will cycle through
the images in reverse order.
● Pressing the r button will cycle through the
images in the order they were taken.
● The images change more quickly if you
keep the
qr buttons pressed, but they
will appear coarse.
● After you have switched from shooting
mode to playback mode, press
1 again
to restore the shooting screen.
● Pressing the 1 button while the camera
is off, turns the camera on in playback
mode. Pressing it again turns the camera
off. Pressing the shutter button halfway in
playback mode switches the camera to
shooting mode.
You can select and erase images one at a time. Please note that erased images
cannot be recovered. Exercise adequate caution before erasing an image.
Select the playback mode.
● Press the 1 button.
The last image you took will appear.
Select an image to erase.
● Press the
qr buttons to display an image
to erase.
1 Viewing Images
a Erasing Images