Changing playback functions, Changing the start-up image or sound, Or sound – Canon D10 User Manual
Page 137: P. 137), Change sounds
Changing Playback Functions
137
You can adjust the settings in the
1 tab by pressing the 1 button
.
Selecting the Image that First Displays in
Playback
●
Select [Resume], then press the
qr buttons
to select an option.
In the
3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
●
Select [Sound Options], then press the
m
button.
●
Press the
op buttons to select an option.
●
Press the
qr buttons to change the sound.
•
Press
if you want to cancel a function.
•
When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode or function setting.
•
In
, each press of the
c button records white balance data
,
and the white balance settings also change to
.
Changing Playback Functions
Last seen
Resumes with the image last
viewed.
Last shot
Resumes with the most recently
shot image.
Changing the Start-up Image or Sound
1
Preset sound.
2
You can register your sounds using the
supplied software (ZoomBrowser EX/
ImageBrowser)