List of messages that appear on the screen, List of messages, That appear on the screen – Canon D10 User Manual
Page 147
147
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
•
The memory card is not installed in the correct direction. Install the memory card
in the correct direction
Card locked!
•
The SD memory card or SDHC memory card’s write protect tab is set to “LOCK”.
Unlock the write protect tab
Cannot record!
•
You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
shooting
.
Memory card error
•
Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
•
There is not enough free space on the memory card to shoot
,
or edit images
–
. Erase the images
to open space for
new images, or insert an empty memory card
Change the battery pack
No image.
•
There are no images recorded on the memory that can be displayed.
Protected!
Unidentified Image/Incompatible JPEG/Image too large./RAW
•
Unsupported images or data, or corrupted image data cannot be displayed.
•
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
register this image!/Cannot modify/Cannot assign to category
•
Incompatible images cannot be magnified
, edited
, registered to the start-up screen
, categorized
,
or added to a print list
.
•
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
•
Movies cannot be magnified
, added to a print list
, or registered to the start-up screen
.
List of Messages that Appear on the Screen