Canon D10 - Manual (Page 26)

26
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Check to Make Sure the Covers
are Closed.
● If either of the covers are not fully closed
while the camera is wet, water may get
inside the camera and cause damage.
Turn on the camera.
● Press the ON/OFF button.
The start-up sound will play, and the
startup screen will appear.
● Pressing the ON/OFF button again will
turn the camera off.
Select the
ƒ mode.
● After pressing the 4 / E button, use the
qr buttons to select ƒ and press m.
● When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
The camera focuses on the subject it
judges to be the main subject, and
displays the icon for the determined scene
in the upper left of the screen.
When faces are detected, a white frame
appears on the face of the main subject,
while gray frames appear on other
detected faces.
Even if the detected faces move, the
camera will follow the faces within a
certain range.
ƒ Taking Pictures