Canon D10 - Manual (Page 136)

Changing Shooting Functions
136
Changing the IS-Mode Settings
● Select [IS Mode], then press the
qr buttons
to select an option.
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the
opqr buttons to select the
functions to register, then press the m
button.
Pressing the
c button will call up the
registered function.
• In mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
Continuous
Image stabilization is always on.
You can confirm the result directly
on the display, which makes it
easier to check the composition or
focus.
Shoot Only
Image stabilization is only active at
the moment of shooting.
Panning
Image stabilization only counters
up and down motion. This option is
recommended for shooting objects
moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.