Canon D10 - Manual (Page 135)

Changing Shooting Functions
135
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr
buttons to select an option.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
● Select [Review Info], then press the qr
buttons to select an option.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
● Select [Disp. Overlay], then press the qr
buttons to select an option.
Off No image displays.
Hold
The image displays until you press
the shutter button halfway.
Detailed Displays detailed information (p. 45) .
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus”
(p. 107) .
Grid Lines A grid overlays the display.
3:2 Guide
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Both
Both grid lines, and the 3:2 guide
will display.