Shooting in manual focus mode, F shooting in, Manual focus mode – Canon D10 User Manual

Page 83: P. 83), F shooting in manual focus mode, Press the q button. select f, Approximate focus, Fine-tune your focus

Advertising
background image

83

When focusing cannot be achieved with autofocus, you can manually set an
approximate focus and then press the shutter button halfway to fine-tune the
focus range.

Press the

q button.

Select

f.

After using the

qr buttons to select f,

quickly press the

op buttons.

f appears on the screen, and the AF
frame in the center of the screen is
magnified.

Approximate focus.

The side bar shows your focal point and a
distance display. While looking at the
magnified area, press the

op buttons to

find an approximate focus. Then press the
m button.

Fine-tune your focus.

Pressing the shutter button halfway will
fine-tune your focus.

f Shooting in Manual Focus Mode

Changing the Distance Units

Press the

n button, then in the 3 tab, scroll down to [Distance Units]

where you can select the desired units of measurement.

For accurate focusing, it is recommended to use a tripod or to otherwise
stabilize the camera.

When using the digital zoom

(p. 61)

digital tele-converter

(p. 62)

, or

when using a television as a display

(p. 77)

, you will be able to focus but

the magnified area will not display.

To turn off the magnified area, press the

n button, and in the 4

tab, scroll down to [MF-Point Zoom] and select [Off].

Advertising