Fine adjustment of the loop points – Akai MPC 2000xl User Manual
Page 113
Chapter 6: Creating and Editing Sounds
Page 102
Fine Adjustment of the Loop Points
Select the
To:
field in the LOOP screen and press OPEN WINDOW to open the Loop To fine
window.
•
To:
This sets the beginning of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Lngth:
This sets the length of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Loop lngth:
This fixes the point of either the end point or the length of the loop.
VARI
When the point where the loop folds is changed, the end point remains
fixed and the length of the loop changes.
FIX
When the point where the loop folds is changed, the length of the loop
remains fixed and the end point moves.
Select the
Lngth:/End:
field in the LOOP screen and press OPEN WINDOW to open the
Loop End fine window.
•
End:
This sets the end of the loop. Change the value with the DATA wheel. You can enter large
numbers by entering a number with the numeric pad and then pressing ENTER.
•
Lngth:
This sets the length of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Loop lngth:
This fixes the point of either the end point or the length of the loop.
VARI
When the end point is changed, the point where the loop folds remains
fixed and the length of the loop changes.
FIX
When the end point changed, the length of the loop remains fixed and the
point where the loop folds moves.
You can enlarge or reduce the sample wave display by pressing
ZOOM+
[F3] or
ZOOM-
[F2].
Press
ZOOM-
[F2] to display the entire wave and set a rough point where the loop folds or the
loop length then press
ZOOM+
[F3] several times to make fine adjustments.
When
PLAY X
[F6] is pressed, you can play back the currently selected sound at full velocity
according to the settings in the
PLAY X:
field. For details refer to “TRIM Mode” section
........................
......................................................................................................
....................................................................................................................................
CLOSE
PLAY X
PLAY X
ZOOM+
ZOOM-
Loop To fine
To:
401258
Lngth:
39730
Loop Lngth:VARI
PLAY X:ALL
........................
......................................................................................................
....................................................................................................................................
CLOSE
PLAY X
ZOOM+
ZOOM-
Loop End fine
Loop End fine
End:
401258
Lngth:
39730
Loop Lngth:VARI
Loop Lngth:VARI
PLAY X:ALL
PLAY X:ALL