Setting the time correct (quantization) – Akai MPC 2000xl User Manual
Page 51
Page 40
Chapter 3: Recording Sequences
Setting the Time Correct (Quantization)
When data is recorded to a sequence in real-time, the note event is time corrected to the value
specified here.
Also, when the bar, beat, or tick point is moved using the STEP < / > key, the value specified here
is used.
.......................................................
..................................................................................................
Sq:
01-(Sequence01)
TrMUTE
SOLO
Tr +
Now:001.01.00
STEP
EDIT
Tr -
™:120.0(MAS)
Timing:
1/16
Tsig: 4/ 4
Tsig: 4/ 4
Count:OFF
Loop: ON
Loop: ON
Bars: 0
Bars: 0
Tr:01-Track01
ON:YES
Pgm:OFF
S:DRUM1:OFF New Pgm-A
S:DRUM1:OFF New Pgm-A
Velo%:100
Select the
Timing:
field with the CURSOR and set the quantize rate by rotating the DATA
wheel. The options are as follows:
OFF
No timing correction. Moves the point by one tick each time the STEP < / > key
is pressed.
1/8
All notes are moved to the nearest 1/8-note (48 tick).
1/8(3)
All notes are moved to the nearest 1/8-note triplet (32 tick).
1/16
All notes are moved to the nearest 1/16-note (24 tick).
1/16(3)
All notes are moved to the nearest 1/16-note triplet (16 tick).
1/32
All notes are moved to the nearest 1/32-note (12 tick).
1/32(3)
All notes are moved to the nearest 1/32-note triplet (8 tick).
It is also possible to make fine adjustments in the following Time Correction window.
CAUTION: Timing Correct is only valid for note events. Control Change or Pitch Bend will not be
time corrected.
To make fine adjustments in the Time Correct window, select the
Timing:
field with the CUR-
SOR key and press the OPEN WINDOW key.
..........................
CLOSE
DO IT
Note value:
Note value:
1/16
Swing%:50
Shift timing:EARLIER
Shift timing:EARLIER
amount: 0
amount: 0
Time:001.01.00-001.01-00
Notes:ALL
(HIT pad)
(HIT pad)
....................................................................................
....................................................................................
...................................................................................................
...................................................................................................................................
Timing Correct
Timing Correct
To time correct recorded data, set the following fields and press
DO IT
[F5]. Only the track
selected on the main screen will be time corrected.
•
Note Value:
This is the same as the
Timing:
field on the Main Screen.
•
Swing %:
This appears only when
Note Value:
is set to 1/8 or 1/16. Shift the note events of the
even beats at the ratio set here to add a swing to the rhythm.
•
Shift Timing:
This shifts the note event back or forward the number of ticks set in the
amount:
field
below.
EARLIER
shifts forward
LATER
shifts back