Timing correct in “step edit – Akai MPC 2000xl User Manual
Page 76
Chapter 4: Editing Sequences
Page 65
AS PLAYED
The metronome will play from the moment the drum pad or MIDI key-
board is pressed until it is released.
TC VALUE:
Regardless of the time that the key is actually pressed, the duration will
be the value set in the
Timing:
field.
When
TC VALUE
is selected, the percentage field will also appear.
The duration is set against the
Timing:
field by percentage. For ex-
ample, if it is set to 50%, the duration is half the amount set in the
Tim-
ing:
field and the result will be a staccato sound.
Timing Correct in “Step Edit”
When the
TC
[F1] key is pressed, the following window will appear.
While pressing the key, rotate the DATA wheel to change the value of “Timing Correct”.
For more details, please refer to the “Timing Correct” section.
The Event Display
The note event displayed on the step edit screen will change depending on whether the selected
track is a drum track or a MIDI track.
Drum track
N:
This is the note number and the Drum Pad number assigned to it.
Tun:
This field will display the note variation data.
D:
This is the duration (length of note on).
V:
This is the velocity (how hard the note is played). The right side will display the
velocity value in a bar chart.
MIDI Track
N:
This displays the note number and note name.
D:
This is the duration (length of note on).
V:
This is the velocity (how hard the note is played). The right side will display the
velocity value in a bar chart.
Bend
Control Change
Program Change
..................................................................................................
DELETE INSERT
PLAY
TC
PASTE
COPY
>N: 38/A06 Tun:
0 D: 1 V:
0 D: 1 V:
37
>N: 46/A07 Tun:
0 D: 2 V:
0 D: 2 V:
26
>N: 46/A07 Tun:
0 D: 28 V:
0 D: 28 V:
10
>N: 46/A07 Tun:
0 D: 1 V:
0 D: 1 V:
11
View:
ALL EVENTS
Now:001.01.00
.........................................
.........
......
.............................................
Value:1/16(3)