Akai MPC 2000xl - Manual (Page 68)

Page 57
Chapter 3: Recording Sequences
• Display style:
Select B A R , B E A T , C L O C K to display bar, beat, and clock. Select
HOUR,MINUTE,SEC to display the hours, minutes, and seconds.
• Start time:
Select HOUR,MINUTE,SEC in Display style: to start the time display on the
main screen from the time set in this field. This can also be used as the start time to
synchronize MTC (MIDI time code) or SMPTE time codes.
• Frame rate:
This sets the frame rate of the time code used to synchronize the MTC or SMPTE code.
Synchronization is described in “MIDI/SYNC Mode”.
The Main Screen Function Keys
.......................................................
..................................................................................................
Sq: 01-(Sequence01)
TrMUTE SOLO Tr +
Now:001.01.00
STEP EDIT Tr -
™:120.0(MAS) Timing:1/16 Tsig: 4/ 4 Tsig: 4/ 4
Count:OFF Loop:OFF Bars: 2 Bars: 2
Tr:01-(Unused) ON:YES Pgm:OFF
S:DRUM1:OFF New Pgm-A New Pgm-A Velo%:100
•
This displays the step edit page which allows you to edit on sequence data at a time.
•
This edits or sets other elements of a sequence.
•
TrMUE
This turns the track on or off.
•
This enables you to play only the currently selected track. The SOLO display blinks when
you press the key and enables solo playing. Press it again to turn it OFF, enabling all tracks
to play.
•
Select the track with this function key. It is not necessary to move the cursor to the Tr:
field.
TrMUTE TrMUTE TrMUTE TrMUTE TrMUTE