Automatic fancy stitches, Satin stitch control – Bernina 532-2 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Feather Stitch hand operated

a) wUh one needle
b) with two needles

Stitch 1«nirth

Stitch width

Stitch location

aimovt »erg

Almost Aeru

a‘i

C

Kii:. (>i!

Satin stitch control

Most ornamoiitst stitches are

sewn with a stitch lenfrlh of
"almost zero", i.e. with a

very small materia] feed. If,
between the making- of such

stitches, the machine is used
with a larger material feed,

e. g. for normal sewing Jobs,

the resetting of the stitch

length to “ almost zero ”

causes a little trouble and

some waste of time. This de­
fect is remedied by the built-

in

patented

straight-sided

satin stitch stop 68 51) (Fig.

2 ) .

If, for instance, you are

doing normal sewing work

with the stitch length 2 and

want to change hack to the
straight-sided satin stitch.

82

then swivei the stop to the left by lifting handle 69, which projects from the vertical

part of the frame, upwards until it meets with resistance, and move the stitch regulator

knob 14 (Fig. 2) upwards as far as it will go. The straight-sided satin stitch can now
be sewn without your needing to apply any hit-or-miss method. By pressing the handle
bO down, the normal position for the selection of the stitch length, forwards and back­
wards, is restored.

With a particular stitch length seams of varying thickness result according to the
thickness of the yam. The stop is thus set at the desired yarn thickness as follows:
By turning knob 68 a very little to the right, the stitch length is shortened, which

results in the seam being thicker; this is necessary when thin yarn is used. A very little
turn to the left results in a slight increase in the little length so that a seam of uniform

thickness can he achieved with thick yarn as well.

Automatic Fancy Stitches

Ürjy

Í 0 i á o d e l 9 9 0 - $

Every BFKNINA Record Machine Model 630-2 is equipped with the automatic orna­
mental stitch device which enables ornamental stitches to be sewn without manipulation

of the controls. Just select the pattern desired, set the control lever and then simply

concentrate on guiding the fabric through the machine with both hands free to do so.

83

Advertising
This manual is related to the following products: