Aiwa SX-N332 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
<FM section>
<CD player sectlon>
Frequency range
87.5 MHz to 108 MHz
Disc
Compact disc
Usable sensitivity (iHF)
1.3|iV(75 ohms) 13.2 dBf
Scanning method
Non contact optical scanner (semi
Alternate channel selectivity
50 dB (±400 kHz)
conductor laser application)
Signal-to-noise ratio
70 dB (STEREO), 76 dB (MONO)
Laser
Semiconductor laser (A, = 780 nm)
Harmonic distortion
0.3 % (MONO), 1 kHz
Rotation speed
Approx. 500 rpm - 200 rpm (CLV)
0.5 % (STEREO, L-R), 1 kHz
Error correction
Cross Interleave, Reed Solomon
Frequency response
30 Hz to 15 kHz (±0.5 dB, - 3 dB)
code
Stereo separation
33 dB at 1 kHz
No. of channeis
2 channels
Antenna
75 ohms (unbalanced)
D-A conversion
16-bit linear
Wow/flutter
Unmeasurable
<AIVI (MW) section>
Signal-to-noise ratio
90 dB (1 kHz, 0 dB)
Frequency range
NSX-330HE, E, K, NSX-A92HE:
Harmonic distortion
0.05% (1 kHz, 0 dB)
AM 531 (530) kHz to 1,602 (1,710)
kHz
<Speaker SX-N330>
NSX-330LH, U, C, NSX-332U:
Cabinet type
3 way, bass reflex (Magnetism sealed
AM 530 (531) kHzto 1,710 (1,602)
type)
kHz
Speaker
130 mm (5Vs in.) cone type woofer
Usable sensitivity
350 |j,V/m
50 mm (2 in.) cone type tweeter
Selectivity
22 dB (9 kHz)
20 mm ('Yi6 in.) ceramic type super
Signai-to-noise ratio
53dB(100 dB input)
tweeter
Antenna
Loop antenna
Impedance
6 ohms
Music power
40 W
<LW section>(E and К modeis oniy)
Output sound pressure level
87 dB/W/m
Frequency range
144 kHz to 290 kHz
Dimensions (W x H x D)
180x302.5x200 mm
Sensitivity
1,400 pV/m
(7Va
X
12
X
7Vs in.)
Antenna
Loop antenna
Weight
2.6 kg (5.7 lbs.)
<Timer section>
<General>
Program timer
On-timer, capable of free setting
Power requirements
NSX-330LH, HE, NSX-A92HE:
Sieep timer
Capable of setting in 10-minute
AC 120 V/220 V/240 V, switchable
increments, 120 minutes maximum
50/60 Hz
NSX-330U, C, NSX-332U:
<Ampiifier section>
AC 120 V/220 V - 240 V, switchable
Power output
NSX-330LH, HE, NSX-A92HE:40W
50/60 Hz
± 40W (6 ohms, T.H.D. 10% 1 kHz)
NSX-330E: AC 230 V, 50 Hz
NSX-330E: 30W ± 30W (6 ohms.
NSX-330K: AC 240 V, 50 Hz
T.H.D. 1% 1kHz)
Power consumption
NSX-330LH, HE, NSX-A92: 85 W
NSX-330K: 40W ± 40W (6 ohms,
NSX-330/332U: SOW
T.H.D. 10% 1kHz)
NSX-330E, K: 21OW
30W ± 30W (6 ohms, T.H.D. 1% 1
NSX-330C: 100W
kHz)
Dimensions (W x H x D)
Center unit:
FTC RULE (NSX-330U, C,
260
X
302.5
X
329.5 mm
NSX-332U)
(1074x 12x 13 in.)
30 watts per channel, Min.
System-
RMS at 6 ohms, from 65 Hz to 15
620 X 302.5 x 329.5 mm
kHz, with no more than 1%
(2472x12x13 in)
Total Harmonic Distortion
Weight
Center unit: 7.2 kg (15.8 lbs.)
Harmonic distortion
0.05% (15 W, 1 kHz, 6 ohms)
System: 12.4 kg (27.3 lbs.)
Input sensitivity
VIDEO/AUX: 150 mV (adjustable)
Accessories
FM feeder antenna (1)
AM loop antenna (1)
<Cassette deck section>
Remote control (1)
Track format
4 tracks, 2 channels
Frequency response
CrOztape: 50-16,000 Hz
• Specifications and external appearance are subject to change without
Normal tape: 50 - 15,000 Hz
notice due to product improvement.
Signal-to-noise ratio
60 dB (DOLBY NR ON, CrOz tape
• Dolby noise reduction manufactured under license from Dolby Laborato-
peak level)
ries Licensing Corporation.
Tape speed
4,8 cm/sec. (1 Ve ips)
“DOLBY” and the double-D symbol OD are trademarks of Dolby Labora-
Recording system
AC bias
tories Licensing Corporation.
Erasure system
AC erase
• The word “BBE” and the “BBE symbol” are trademarks of BBE Sound, Inc.
Motor
DC servomotor x 1
Under license from BBE sound, Inc.
Heads
Playback head x 1 (deck 1)
Recording/playback/erasure head x
Note
1 (deck 2)
Please check the laws on copyright relating to recordings from discs, radio
or external tape for the country in which the machine is being used.
49