ADI Systems AT-201 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
If you are using the battery pack for 6 AA battery, insert
size AA batteries into the battery pack. Be sure that the
batteries are inserted with correct polarity.
NOTE:
Apply the new batteries only.
4
.
Attach the battery to the Transceiver. Engage the battery
on the slot of the bottom of the Transceiver and push the
battery case until it latches in the proper position.
5
■ Turn the power switch on and set the volume control to a
comfortable listening level.
6
Rotate the squelch control clockwise slowly until the
noise from the speaker stops.
NOTE:
Do not rotate the control clockwise too far. Excessive
squelch reduces the radio sensitivity and may prevent
reception.
11