Lo| scanning, C/vscan button and d/mscan button, Lo| scanning ^[c/vscan button and d/mscan button – ADI Systems AT-201 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
a) I
lUC IL.
I I I LI
Note: The call channel may only be programmed In 20
channel mode.
lo| Scanning
^[C/VSCAN Button and
D/MSCAN Button ]
The following buttons have special functions during scanning
Button
During dial scanning
During memory
scanning
6/LOCK
Toggly switches 1 MHz band
scan and partial band scan
Toggly switches all memory
scan and 1 band memory
scan
7/+/-/BS
Switches pause scan and
busy scan(B is indicated on
the display during busy scan)
Switches pause scan and
busy scan(B is indicated on
the display during busy scan)
8/REV/W
Decreases the frequency by
one step and scans
downwards
Decreases the memory
address number by one
step
9/SHIFT/A
Increases the frequency by
one step and scans upwards
Increases the memory
address number by one
step
(information)
No indication is displayed for the above functions except the
busy scan
22