24 setting a shift frequency —^[9/shift/abutton – ADI Systems AT-201 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
24 Setting a Shift Frequency
—^[9/SHIFT/AButton]
A shift frequency for repeater operation can be changed
within the limits of O.OOMHz to 39.995MHz. An independent
shift frequency can be programmed for each memory.
( Procedure )
a)
Press the 9/SHIFT/A button while pressing the Function
button. The current shift frequency in memory will be
displayed. (The shift frequency is initially set to 0.60MHz)
b)
Select the desired shift frequency with the rotary channel
selector or numeral buttons.
c)
Press the CA/SCAN button to return to the previous mode.
52
Advertising