Note, S' b.uu – ADI Systems AT-201 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15 Battery-Save Function
16 Frequency Lock
—^[5/SAVE Button]
—^[6/LOCK Button]
This function allows you to reduce the current drain to 1/3
during receiver standby. The receiver will be activated once
every single second.
( Procedure )
a)
Press the 5/SAVE button while pressing the Function button
A “S” will appear on the display to indicate that the
battery-save function is enabled.
b)
Press the 5/SAVE button again while pressing the Function
button to release the battery saver.
; » _ / ( _ /
I I I
I I - l . L f L I
f
light
I L I
NOTE:
The battery saver is disabled during dual-watch operation
and scanning.
This feature allows you to lock the frequency and operating
mode to prevent improper operation. You can also use this
feature during scanning and dual-watch operation.
( Procedure)
a)
Press the 6/LOCK button while pressing the Function button
A“FL’ will appear on the display to indicate that the frequency
and operating mode is locked.
b)
Press the 6/LOCK button again while pressing the Function
button to unlock them.
. _ _ _
I
I u I-
I
I /
!_l '
light
I-----------
■ ~ n» J
I
I
frequency locked
remain unchanged
; s' b.Uu
down
disappears
34