American Dryer Corp. AD-385 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
d. Once the preprogrammed dryness level and cool down period have been reached or maximum automatic
time has expired, the tone (buzzer) will sound for five (5) seconds, and the LED display will read "donE",
at which time the dryer will shut off.
NOTE: 1. If the anti-wrinkle program is active, the LED display will continue to read "donE", and the
microprocessor controller (computer) will proceed through the anti-wrinkle program until the
maximum "Active Guard Time" has expired or until the door is opened, whichever comes first.
The LED display will read "FILL" and/or "Amount to Start".
2. If the anti-wrinkle program is not active or in use, the LED display will read "FILL" and/or
"Amount to Start".
3. Free Dry Mode (Computer Models)
a. When turning on power or when no cycle is in progress, the LED display will read "FILL" and/or "FrEE".
b. Select temperature.' The dryer will start, the LED display will read the temperature cycle selected, and the
drying time portion of the LED display will read "00" and count upward as the time elapses, or the vended
time will count downward, depending on the program parameter setting.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. However, the
microprocessor controller (computer) will continue to count the time, either upward or
downward, depending on which parameter is programmed. Continuation of the cycle will
resume only after the door has been closed and any one of the three (3) temperature selection
buttons is again depressed.
c. Once the preprogrammed dryness level and cool down period has been reached or maximum automatic
time has expired, whichever comes first, the tone (buzzer) will sound for five (5) seconds, and the LED
display will read "donE", at which time the dryer will shut off.
NOTE: 1. If the anti-wrinkle program is active, the LED display will continue to read "donE", and the
microprocessor controller (computer) will proceed through the anti-wrinkle program until
the maximum "Active Guard Time" has expired or until the door is opened, whichever
comes first. The LED display will read "FILL" and/or "Amount to Start".
2. If the anti-wrinkle program is not active or in use, the LED display will read "FILL" and/or
"FrEE".
30