The data label – American Dryer Corp. AD-385 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE DATA LABEL
1. MODEL NUMBER—The model number is an ADC number which describes the size of the dryer
and type of heat (gas, electric, or steam).
2. SERIAL NUMBER— The serial number allows ADC to gather information on your particular
dryer.
3. MANUFACTURING CODE NUMBER — The manufacturing code number is a number issued
by ADC which describes all possible options on your particular model.
4. TYPE OF HEAT — Describes the type of heat; gas (natural or L.P.), steam or electric.
5. HEAT INPUT — (For gas dryers) describes the heat input in british thermal units.
6. ORIFICE SIZE — Gives the number size drill used.
7. ELECTRIC SERVICE —Describes the electric service for your particular model.
8. GAS MANIFOLD — Describes the manifold pressure as taken at the gas valve.
9. APPLICABLE APPROVAL SEAL(S) — I.E. Arnerican Gas Association, Canadian Gas
Association.
61