Aiwa XR-M88 - Manual (Page 10)

PRESETTING STATIONS
0-9,+10
TUNER/BAND
I
II
The system can store a total of 32 preset stations. (Each band
has a maximum of 20 available preset stations.) When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button on the remote
control (or the FUNCTION button on the CD/tape
unit) to select a band. Then, press the or
button to select a station.
2 Press the II button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Preset number
I
FN 9 0 : : 0 0 M H
Frequency
3 Repeat steps 1 and 2.
The next station will not be stored if 32 preset stations have
already been stored (“FULL” will be displayed).
PRESET NUMBER TUNING
1 Press the TUNER/BAND button on the remote
controi or the FUNCTION button on the CD/tape
unit to seiect a band.
2 Press the button on the CD/tape unit or the
► button on the remote controi.
Each time the button is pressed, the next ascending preset
number is selected.
Tuning by preset number
1 Press the TUNER/BAND button on the remote control to select
a band. (Or use the FUNCTION button on the CD/tape unit.)
2 Press the numbered buttons on the remote control to select a
preset number:
Example:
To seiect preset number 10, press the +10 and 0 buttons.
To select preset number 15, press the +10 and 5 buttons.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ button, and press the II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
If there is a long period of power failure or disconnection of AC
cord, the presetting of the stations is canceled. In this case, preset
again.
1 0
ENGLISH