Aiwa XR-M88 - Manual (Page 22)

SPECIFICATIONS SPEAKER SYSTEM SX-LM200
STEREO RECEIVER RX-LM88
FM tuner section
Tuning range
Usable sensitivity (IMF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Outputs
Generai
Power requirements
Power consumption
Standby power consumption
Dimensions (W x H x D)
Weight
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
16 watts per channel
RMS at
6 ohms, from 65 Hz to
15 kHz, with no more than 1 %
Total Harmonic Distortion
0.1 % (7 W, 1 kHz, 6 ohms, DIN
AUDIO)
SUPERWOOFER: 1.4 V
SPEAKERS: accept speakers of
6 ohms or more
PHONES (stereo minijack):
accepts headphones of 32 ohms
120 V AC, 60 Hz
50 W
2.5 W (power economizing mode
set to ON)
144 X 100 X 206.5 mm
(5% X 4 X 8 V 4 in.)
2.7 kg (5 lbs15oz)
STEREO CASSETTE DECK/COMPACTDISC PLAYER
FD-LM88
Compact disc piayer section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Semiconductor laser (X = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
4 tracks, 2 channels stereo
Cr
02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000 Hz
54 dB (Cr 02 tape peak level)
AC bias
Recordmg/playback head x1
Erase head x2
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
2 way, bass reflex (magnetic
shielded type)
Woofer:
100 mm cone type
Tweeter:
25 mm balanced dome type
6 ohms
87 dB/W/m
120 X 200 X 182 mm
(4% X 77s X 7 V 4 in.)
1.6 kg (3 lbs 8 oz)
• Specifications and external appearance are subject to change
without notice.
uuu SYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radioATV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
General
Inputs
Outputs
Dimensions (W x H x D)
Weight
MD IN: 470 mV
AUX IN: 400 mV
DIGITAL OUT
LINE OUT: 400 mV
144x100.6x203 mm
(5%
X 4 X 8 in.)
1.5 kg (3 lbs 15 oz)
22
ENGLISH