To check the specified time and source, To change the timer setting, To cancel timer standby mode temporarily – Aiwa XR-M88 User Manual

Page 19: Using the system whiie the timer is set, Sening the sleep timer, To cancel the sleep timer, Setting the sleep timer, Sle-lep i?0

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To check the specified time and source

Press the TIMER button while pressing the SHIFT button on the

remote control. The selected source name, the timer-on time
and the duration for the timer-activated period are displayed for

4 seconds.

To change the timer setting

Set the timer again from the beginning.

To cancel timer standby mode temporarily

Press the TIMER button repeatedly while pressing the SHIFT

button on the remote control so that “TIMER OFF” is displayed
on the display.

To restore the timer standby mode, select “TIMER © REC” or

“TIMER © PLAY” instead of “TIMER OFF.”

Using the system whiie the timer is set

You can use the system normally after setting the timer.

Before turning off the power, prepare the source and the recording

source, and adjust the volume and tone.

NOTE

' Timer play and timer recording will not begin unless the power

is turned off.

' Connected equipment cannot be turned on and off by the built-

in timer of this system. Use an external timer.

SEniNG THE SLEEP TIMER

SLEEP

1

oc
0(3
oc

^oo
DOO

300

C3 o

o o

Cl131000

d3l

I ^

o o o o o

o

cc

IIJ

s
p

SHIFT

The system can be turned off automatically at a specified time.

Use the remote control.

1

Press the SLEEP button while pressing the SHIFT

button on the remote control.

2

Within 4 seconds, press the ◄◄ or ►► button

to specify the time until the power is turned off.

Each time the button is pressed, the time changes between 5

and 240 minutes in 5-minute steps.

SLE-lEP i?0

Specified time SLEEP

To check the time remaining untii the power is turned
off

Press the SLEEP button once while pressing the SHIFT button

on the remote control. The remaining time is displayed for 4
seconds.

To cancel the sleep timer

Press the SLEEP button twice while pressing the SHIFT button

on the remote control so that “SLEEP OFF” is displayed.

ENGLISH

1

9

Advertising