Dolby Laboratories DP503 - Manual (Page 20)

2A-4
Parameter Value
Algorithm Type AC-2
Data Rate 256
Channel Mode 2C
Sample Rate 48
Aux Rate 12
ISDN (Inverse Multiplexing type) BONDING-1 64
4. Save the directory entry.
2A.6 Quick Start for Placing Dolby Fax Calls
Note Refer to Section 5.4.3 for a comprehensive procedure on making calls.
1. Press DIR.
2. Select USE.
3. Find the desired directory listing by scrolling with the
ÇÈ keys.
4. Press ENTER. The call will be initiated. Look for
ÆÆLOCATION on
the display to confirm that the call is established.
Hint: You will also see the Lock LED on the DP524 become green, and the Mute LED on the DP524
extinguish.
5. Remember to Hang Up by pressing Shift +
È or ESC. Select Y to
confirm.
2A.7 Receiving Dolby Fax Calls
Call setup is automatic: The ISDN unit will automatically answer an incoming call,
and the DP524 decoder unit will automatically configure itself for the proper
algorithm.
But, your DP503 encoder must be manually set to match the incoming call:
1. With the DP503 in the default encoder parameters screen, make
adjustments to the encoder, if necessary, to match the incoming algorithm,
data rate, channel mode, sample rate, and aux rate.
Note: Refer to Section 5.2 for a comprehensive procedure on changing encoder parameters.
MAIN