Dolby Laboratories DP503 - Manual (Page 42)

5-6
Æ
arrow key to both select the entry and move to the next parameter. Units are kbps
(kilobits per second).
Note: Available rates are dependent on the selected algorithm. Data rates displayed represent the total data
rate.
Available data rates:
Display Display Display
040 096 224
048 112 256
056 128 320
064 160 384
080 192 448
5.2.3 To change Channel Mode
AC2 256 2C 48 12
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
Use the
Å
and
Æ
arrow keys to place cursor on the first character of settings in the
Channel Mode column. Use the
Ç
and
È
arrow keys to scroll through available
settings as shown in the table below. Use the ENTER key to select the chosen value,
or press the
Æ
arrow key to both select the entry and move to the next parameter.
Note Available channel modes are dependent on the selected algorithm and data rate.
Available channel modes:
Label Channel Mode Comments
1C Mono Accepts audio from Ch A only
2C Dual mono
JS Joint stereo
5.2.4 To change Sample Rate
Use the
Å
and
Æ
arrow keys to place cursor on the first character of settings in the
Sample Rate column. Use the
Ç
and
È
arrow keys to scroll through available settings
as shown in the table below. Use the ENTER key to select the chosen value, or press
the
Æ
arrow key to both select the entry and move to the next parameter.
Note Available sample rates are dependent on the selected algorithm.
MAIN