Internal fuse – Dolby Laboratories DP503 User Manual
Page 26
Advertising
3-2
With a small flat-blade screwdriver, open the fuse compartment door in the AC
power input housing (see figure below).
OPEN THE
DOOR
ACTIVE
FUSE CARRIER
(LOWER)
FUSE
Check that the fuse in the active (lower) fuse carrier is of the correct rating. A spare
fuse can be stored in the upper fuse carrier position.
Snap the fuse compartment door closed.
Internal Fuse
The switching power supply contains a separate fuse. Most fault conditions should
be protected by the main fuse. The internal fuse rating is:
2 Amp, 250V, 20 mm, fast-blow.
MAIN
Advertising