Dolby Laboratories DP503 - Manual (Page 53)

5-17
EDIT ISDN? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
As usual, use the
Å
and
Æ
arrow keys and the ENTER key to choose Y. You will
then see a screen similar to the following:
ÇÈ
BONDING-1 64
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
Use the
Ç
and
È
arrow keys to scroll through available parameters as shown in the
table below. While the cursor is blinking, the parameter remains unselected; after a
brief time-out period, the setting prior to any scrolling action will be restored. Use the
ENTER key to make your selection. You will then proceed to the next screen.
Available parameters:
Parameter Comments
AIM STATIC 64 Ascend’s 64 kb version of inverse multiplexing.
AIM STATIC 56 Ascend’s 56 kb version of inverse multiplexing.
BONDING-1 64 Standard 64 kb version of inverse multiplexing.
BONDING-1 56 Standard 56 kb version of inverse multiplexing.
AIM DELTA 56 Ascend’s method of allowing the use of 56 kbps lines to
convey data normally requiring 64 kpbs lines.
1 CHNL 56
1 CHNL 64
Notes: For standard Dolby Fax configurations using 2 channels of Dolby AC-2 audio coding at 256 kbps,
choose BONDING-1 64.
The hierarchical nature of the menu system will eliminate from the visible menu choices those parameters that
are not relevant, as determined from the data rate that is being used.
Details of inverse multiplexing can be found in the ISDN Glossary in Appendix E.
The next screen concludes the directory entry procedure.
STORE ENTRY? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
As usual, use the
Å
and
Æ
arrow keys and the ENTER key to make your selection.
If you choose Y, you will return to the first screen in the Directory mode.
MAIN