Dolby Laboratories DP503 - Manual (Page 50)

5-14
ª
Use the screen above to USE an existing directory entry; EDIT an existing
directory entry; create a NEW directory entry, or DELete an existing directory
entry.
Use the
Å
and
Æ
arrow keys to move back and forth among the five available
parameters.
Use the ENTER key to descend into subsequent menus to fully configure the
multiple entries needed for each parameter.
Use the
Ç
and
È
arrow keys to bring into view the available settings under
sub-menus.
The ESC key can be used to back up. You may encounter the ABORT
EDITS? inquiry. Use the arrow and ENTER keys to make your choice.
Choosing Y will return you to the default encoder parameters screen.
Once the ENTER key is depressed, settings are stored in the DP503.
5.4.2 Creating New Directory Entries
Note The following sub-section is presented in great detail as a tutorial to the use of the other Directory
options. Remaining sub-sections rely on the information presented here.
USE EDIT NEW DEL
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
Begin by using the
Å
and
Æ
arrow keys to place the cursor on the first character of
the designation NEW. Then press ENTER.
You will then see the following screen:
COPY ENTRY? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
The purpose of the above screen is to simplify the creation of directory entries that
vary only slightly from existing entries. It is somewhat akin to the “save as” feature in
computer file management systems. See Section 5.4.2.1 below.
If this is your first entry, choose N by using the
Å
and
Æ
arrow keys as needed and
pressing the ENTER key.
MAIN