Dolby Laboratories DP503 - Manual (Page 54)

5-18
If you choose N, you will be presented with the following screen
RE-EDIT? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
If you choose Y, you will have the opportunity to check your data entry, starting at the
top of the directory entry screens.
If you choose N, you will exit the data entry process without saving the entry, and you
will return to the first screen in the Directory mode.
5.4.2.1 Using the COPY ENTRY? Feature
Note: Dolby Fax entries can only be used to create other Dolby Fax entries; encoder entries can only be
used to create other encoder entries.
COPY ENTRY? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
If, during the process of creating a new directory entry, you will have the opportunity
to use an existing entry as the basis for creating new entries.
If you select Y on the above screen, you will then see the following screen:
ÇÈ
YOUR ENTRY 1
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
Use the
Ç
and
È
arrow keys to scroll through your existing directory entries. While
the cursor is blinking, the entry remains unselected; after a brief time-out period, the
setting prior to any scrolling action will be restored. Use the ENTER key to make
your selection.
You will then proceed to the full set of data entry screens, beginning with NAME.
Enter a different name so that you can distinguish this entry from the one on which it
is based.
MAIN