Dolby Laboratories DP503 - Manual (Page 56)

5-20
5.4.4 Editing Directory Entries
USE EDIT NEW DEL
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
To edit an existing directory entry, use the arrow and ENTER keys to select EDIT
from the above menu. Then use the
Ç
and
È
arrow keys to scroll through your
existing directory entries. Select the desired entry with the ENTER key.
You will then proceed to the full set of data entry screens, beginning with NAME.
Use the arrow and ENTER keys as appropriate to make any desired modifications.
Select Y when presented with the Store Entry? screen to save your changes.
5.4.5 Deleting Directory Entries
USE EDIT NEW DEL
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
To delete an existing directory entry, use the arrow and ENTER keys to select EDIT
from the above menu. Then use the
Ç
and
È
arrow keys to scroll through your
existing directory entries. Select the desired entry with the ENTER key. When
presented with the confirmation screen, selecting Y will delete the entry.
5.5 Using the DIRectory: Encoder-only Applications
The DP503 can store up to 48 different entries, representing either encoder
parameters, complete Dolby Fax entries, or both, and can be retrieved by user-defined
names.
Encoder-only parameters are designated with an asterisk (*) as the first character of
the directory entry.
Upon power-up, the DP503 will go through a self-test sequence. Two screens showing
software revision levels will appear; then the default encoder configuration screen will
be displayed. It will look similar to the following:
AC2 256 2C 48 12
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
If you have already used the push-button keys to reach another screen, and hence do
not see the display above, press the ESC key enough times so that you do. The actual
MAIN