ADLINK aTCA-N700 - Manual (Page 14)

aTCA-N700 SW Users Guide
８
Table 3-1 Deliverables
Item Type Contents Description
lmp.patch patch
QorIQ-DPAA-SDK
generates (compiles) LMP
U-Boot, linux kernel, and
rootfs images with the
patch.
Usage example:
1. Make sure that QorIQ-
DPAA-SDK is installed.
2. patch –p1 < lmp.patch
3. tar –xvzf lmp-vendor-
drops.tgz
4. Follow the compilation
process by QorIQ-DPAA-
SDK.
lmp-vendor-
drops.tgz
binary
LMP linux application layer
includes the following:
- Broadcom switch S/W
(bcm.user),
- H/W diagnostics
program
- ipmi utility
- CPLD access utility
- upgrade utility
lmp.patch assumes that lmp-
vendor-drops.tgz file is
properly copied to the QorIQ-
DPAA-SDK source tree.
bcm.patch patch
BCM-SDK generates
(compiles) Broadcom
switch program with the
patch.
Usage example:
1. Make sure that the BCM-
SDK is installed.
2. patch –p1 <bcm.patch
3. Follow the compilation
process by the BCM-SDK.
np.rpm rpm
OCTEON-SDK generates
(compiles) NP U-Boot and
linux images with U-Boot,
linux, and executive
patches.
Usage example:
1. Make sure that the
OCTEON-SDK (rpm file) is
installed.
2. rpm –ivh np.rpm
3. Follow the compilation
process by OCTEON-SDK.
uboot.lmp binary bootloader image for LMP
dtb.lmp binary
device table binary image
for LMP
linux.lmp binary linux kenel image for LMP
rootfs.lmp binary
root file system image for
LMP
uboot.np binary bootloader image for LMP
linux.np binary linux image for NP
booter.ipmc binary booter image for IPMC
firmware.ipmc binary firmware image for IPMC
fruinfo.ipmc
binary FRU info image for IPMC
upgrade utility is used to load
the images.
release-note pdf
Package version change list
and file names are
provided.
user-guide pdf S/W manual