Igure, Hannel, Nfo command – ADLINK aTCA-N700 User Manual
Page 70: Ccess command, Ame command, Ccess, Ommand, Assword
Advertising
aTCA-N700 SW Users Guide
64
■ Obtain general information about an ipmi channel. This command can be used to
find out whether a given channel supports session establishment.
Figure 11-2 Get Channel Info command
■ Set a privilege level for a spefied user.
ipmitool channel setaccess <channel num> <user id> privilege=<priv level>
Figure 11-3 Set Channel Access command
■ Change a user name.
ipmitool user set name <user id> <user name>
Figure 11-4 Set User Name command
■ Obtain the access attributes associated with user.
ipmitool channel getaccess <channel number> <user id>
Figure 11-5 Get Channel Access Command
■ Change a user password.
ipmitool user set password <user id> <new password>
Figure 11-6 Set User Password Command
Advertising