Introduction – ADLINK aTCA-N700 User Manual

Page 7

Advertising
background image

aTCA-N700 SW Users Guide



1. Introduction



The aTCA-N700 is a single slot AdvancedTCA blade powered by dual OCTEON II
multi-core processors for high performance packet processing applications such as LTE
wireless, security and other networking applications. The blade provides up to 40Gbps
full duplex packet processing performance with flexible network interfaces.

The aTCA-N700 is designed to provide high performance security enabled intelligent
deep packet inspection and processing functions that are required by high-end network
appliances, security appliances, switches, and servers. The major building block is the
Cavium CN6880 packet processor subsystem.

The Cavium CN6880 has 2MB of L2 cache which is shared by 32 cnMIPS cores. Each
cnMIPS core also has dedicated 37K lcache and 32K Dcache. DDR3 memory has total
400Gbps bandwidth. Hardware acceleration blocks are also available for the most
advanced networking and security applications. RegEx engine enables high throughput
pattern matching with optional co-processors.

The blade also has a high performance, non-blocking, local switch fabric to interconnect
CN6880, backplane, and I/O ports altogether. This feature allows the data path to be
configured in many different ways to fully utilize the multi-core CPUs and provide the
flexibility for application programming. There are basically 3 modes of data path
operation: serial, parallel, and by pass, which can be configured depending on the
application requirements.

The application areas of the blade are summarized but not limited to:

• Wireless backhaul aggregation Switch/Router, which requires Deep Packet

Inspection capability

• Security Appliances such as Firewalls, VPN and IDS/IPS
• Content based fine grain load balancing switches
• Front end I/O card with traffic management for high capacity, value added

appliances for multi-service offering

• Network Monitoring and Analysis Services

• Ethernet aggregation nodes

This document describes a software overview and provides basic operation instructions
for the users.

Advertising